Message Board -  Archive

[ Login ] [ Create Account ]
[ Board List ] [ View Board ] [ Post Reply ]
  Author  Subject: Re: RR Resolution...

Posted on 11-04-2000 02:46 p.m. ET  reply

Original Poster: Mark Krentel

> As it stands now one card won't work with RR but works fine on my LAN
> and the other card is fine for both. Go figure.

Just a wild thought, but is this a PCI 10/100 card? I'm guessing RR's
cable modem runs at 10MB/s, so if the card is trying to run 100Mb/s,
it will look like the card doesn't work. And it's not uncommon for
some cards to have trouble auto sensing the speed (bandwidth). There
should be an option to ifconfig to set this, but I don't see it.

> The good thing that came out of all this mess is that I am now running
> Debian 2.2 on both my workstation and my network gateway. Ah, smell
> the clean air. Not an RPM in sight. :-)

Ah, poor Scott, you put up such a brave face. :-)


< Previous 1 Next >

Site Contents