Message Board -  Archive

[ Login ] [ Create Account ]
[ Board List ] [ View Board ] [ Post Reply ]
  Author  Subject: SuSE 8.1 restore issue using a Sony AIT 260e drive.

Posted on 11-23-2004 02:41 p.m. ET  reply

Original Poster:

Hey there,

I am have a Compaq Proliant ML370 Server with SuSE 8.1 Samba 2.2.8
I just installed a new Sony AIT 260e tape drive and it backs up incredibly
fast and writes to the tape correctly both from my backup software
and from the command line. However I get input/output errors when I try to
do a restore from either. I know the tapes are good because I can restore
with them on another system with any of the tape drives. The tape drive is
attached to the onboard SCSI controller, I have a separate array controller
for the drives. I have tried 3 different new tape drives and all new
I have had a SureStore DLT8000 attached to the same server and cable for
quite sometime and can backup and restore correctly with it.

I have a newer ML370 system with Redhat 7.2 Samba 2.2.7 and the drive works
there without any problems and
can also do restores from the tapes created on the SuSE box.

How can I find out if there is a firmware upgrade required on any of the
internal parts of the server (onboard controller, motherboard,...) that
need to
be updated?? Any suggestions would be appreciated.

Thank you


< Previous 1 Next >

Site Contents